Gradient fillGradient fill
Mountaineering Shop
Site MapContact UsTerms & CondsWeatherAbout UsSuppliersMountaineering

spacer imagespacer image

 Le Ticket, le carre, le Ronde et la lune. Chamonix

Le Ticket, le carre, le Ronde et la lune. Chamonix


Graham Briffett climbing the classic Le Ticket, on Aiguille de Peigne.
Black Diamond Quicksilver QuickdrawBlack Diamond Quicksilver Quickdraw

The classic straight/bent set-up, the Quicksilver Quickdraw has a Quicksilver straight gate top biner and a Quicksilver bentgate bottom biner. It comes equipped with a 12 mm Dynex dogbone with the Straitjacket System. Typical Black Diamond quality with smooth action at a very good price!

SPECIAL DEAL: Buy 6 pack and save 10%
Price: £12.50


Quantity:  

Dmm Spectre QuickdrawDmm Spectre Quickdraw
The is the updated version of the highly popular and super light prowire quickdraw.They now use I beam constuction to shave further grams of the Krabs making them even lighter but every bit as strong. A considerable weight saving when evey ounce counts.
Krab strengths are as follows

Gate closed 24KN , Gate open 10KN , cross loaded 8KN.

Available in 3 lengths.

Length


Quantity:  

Dmm Shield Quickdraw Dmm Shield Quickdraw
The Shield is the updated version of the Wirelock with the same patented wirelock system but with a thinner nose profile for easier clipping and to prevent annoying snagging.The new I beam constuction has helped to reduce the weight considerably making a 12cm shield quickdraw set 21grams lighter than the equivalent wirelock quickdraw set but every bit as strong.

Gate closed 24KN , Gate open 10KN , cross loaded 9KN.

Available in 3 lengths.

Lenth


Quantity:  

Dmm Phantom QuickdrawDmm Phantom Quickdraw
The Phantom Quickdraw is the lightest on the market. The Phantom is a super specialised biner following the light is right path but crucially using I beam technology and 7010 aluminium to keep the strength high.
12cm Quickdraw weight 58grams
Price: £14.50


Quantity:  

DMM Ripstop D.L.L. Shock Absorber DMM Ripstop D.L.L. Shock Absorber

When you’re sketching 20ft above your last piece, put the odds in your favour. The ripstop is a computer sewn load limiting sling that can reduce the force on marginal climbing pro. Perfect for desperate trad routes and ice climbs.Comes with computerised bartacking, which reduces impact force. Great choice for marginal placements.
Uses standard snap gate or wire gate carabiners at both ends.
Price: £16.00


Quantity:  

Petzl Nitro  Energy absorbing quickdrawPetzl Nitro Energy absorbing quickdraw

For dubious protection on ice, mixed ground and traditional climbing.

The tearing of the stitching reduces the impact force exerted on protection in the event of a severe fall (tearing threshold at 2.5 kN, breakage at 22 kN).

Velcro tab prevents the branches from hanging down and catching on other equipment.

Size: 16cm
Weight: 60grams

Price: £22.00


Quantity:  

yates banner
Yates ScreamerYates Screamer

Multi-functional energy absorbing device. Screamers will provide added protection in climbing and rescue situations. Screamers not only absorb energy directly because of the stitch ripping effect, they also allow your rope to absorb more energy from the fall by increasing the time interval of the fall. Screamers can reduce shock loading in any rescue system. The standard Screamer can effectively reduce peak loads by 3-4kN in any climbing or rescue system.
Activates at 2Kn. Reduces peak loading by up to 3-4Kn. Over-all runner strength 26Kn
Price: £16.00


Quantity:  

Yates 'Zipper' Screamer Yates 'Zipper' Screamer

The new ZIPPER Screamer is designed for long falls with high fall factors. These types of falls occur usually within the first two or three protection placements that are run out. Ice climbing is a good example where the ZIPPER is exceptionally effective when used on the first few placements. The ZIPPER can effectively reduce peak loads by 6-8kn in any climbing system and activates at 2kn. Runner Strength:26kN
Price: £21.50


Quantity:  

Yates 'Shorty' ScreamerYates 'Shorty' Screamer

The new SHORTY Screamer offers the exact same properties as the standard Screamer in a more compactly packaged unit. Activation: >2kN. Reduction in system peak loading 3-4kN. Runner Strength: 26kN.

Price: £16.00


Quantity:  

Yates Ice-ScreamerYates Ice-Screamer

The Yates 'Ice-Screamer' is specifically designed for use with ice screws. It can be used as a standard Screamer with carabiners at either end for clipping or you can use the clever tie-off mechanism which allows quick and easy attachment to screws if they need to be tie-off. The 'Ice -Screamer' will activate at 2Kn. It will reduce peak loading by up to 3-4 Kn. The over-all runner strength is 26Kn.

For those pushing their limits on steep or thin ice, or anyone who's thinking about trying one of the Ben Nevis thin face routes where you're lucky to place a screw half way, the 'Ice-Screamer will be a welcome addition to you rack.

Colours at present: Yellow
Price: £17.00


Quantity:  

spacer image